Home
About Us
Services
Our Products
Resource Center
Contact Us

Select Your Profile
Consumer
Small Business
Corporate
Criminal Justice

Self-Service Shredding Kiosk
Overview
Features
What's Inside
Benefits
Applications
Support
Maintenance

 

ITS Self-Service Shredding Kiosk
« Return To Shredder

Maintenance

Items required for servicing the kiosk:

The following service routine is required every time the shred bag is emptied:
Note: Empty the shred bag when full (when paper shredded material is visible at the top window level)
  1. Check the overall condition of the kiosk
  2. Run the reverse code (see Installation instructions) and run a bead of oil onto two sheets of paper, then feed chute opening, repeat
    3. this process at least six times, allowing the kiosk to run at least thirty seconds
  3. Open the shred bin door and remove shred bag and box
  4. Remove shred bag materials and tie off bag *Note the shredded material can be recycled or thrown away and the bag can then be re-used for the next servicing
  5. Vacuum or sweep out any remaining loose or stray shreds
  6. Prepare and install a new shred bag as directed in the Installation section
  7. Wipe down the inside of the shred bin door and allow it to dry
  8. Wipe down the kiosk as directed in the Installation section
  9. Close and lock the shred bin door
The following services routine is required once a month:
  1. Unplug the power source
  2. Open the kiosk back door using the supplied brass key
  3. Vacuum out the inside of kiosk to include the walls, shredder base, electronic boards, shredding mechanism, etc.
  4. Verify no cables have come loose
  5. Close and lock the door